Ten Essential Steps to Building Your Custom Hillside Home

Envision your dream home, perched atop the perfect mountain overlooking the vast landscape below. Feel the warm sun against your skin as you sip your morning coffee and watch the sky turn brilliant colors of red, orange and pink. With each new hour the scenery outside your window changes, an evolving canvas of light and color. A magnificent painting lay before you, a private masterpiece view able only from the window of your custom home.

A home in the mountains offers more than just beautiful landscapes and stunning sunset views. Hillside construction provides a sense of privacy and seclusion that many homeowners desire when considering their dream home. Far away from the hustle and bustle of the city life, a mountainside home can transform daily living into an oasis of tranquility. However, hillside construction has its own set of unique challenges. Follow these 10 steps to ensure your mountainside construction project is built without a hitch.

1. Hire a Local Builder Who Specializes in Mountainside Construction

Before you decide to build your dream home in the mountains, make sure that the new home builder you hire is experienced in hillside construction in your town. Each municipality has its own set of zoning regulations. It is best to find a home remodeling contractor that can provide actual photos and references from previous home builds in your area. A local contractor will understand the soil, topography and hydrology that is involved in your construction project and can guide you throughout the design process.

2. Choose The Location for Your New Home

One of the most important aspects of your custom home build is choosing the location. Mountainside building is environmentally sensitive and follows strict building regulations and zoning ordinances. Many factors influence the choice of location for your home. This includes the type of soil, drainage patterns and boulder formations. All proposed building sites should undergo a thorough analysis, identifying both challenges and opportunities before moving forward with the home design process.

3. Plan Your Home Design With The Natural Landscape

As said by the Father of Arizona building, Frank Lloyd Wright, “No house should ever be on any hill or on anything. It should be of the hill, belonging to it, so hill and house could live together, each much happier for the other.” When designing your custom home, the placement of the building should be a key consideration. Some important factors to discuss with your home designer are the surrounding views, location of mature vegetation, angle of the sun and prevailing winds. Multi-story buildings should be stepped into the natural contours of the site to establish harmony with the natural landscape.

4. Use Building Materials That Enhance The Mountain

A well-designed mountainside home is a blend of nature and design. Your custom home build should enhance the beauty of the mountain, using colors, textures and materials that coordinate with the natural landscapes. Focus on muted colors that match the desert tones. Shiny metals and other reflective colors should be used minimally. Textured patterns are recommended on the building facade to increase light absorption and tinted windows will help to decrease heat gain. Using desert varnish on exposed rock will enhance the stone’s natural appearance.

5. Avoid Using Excessive Exterior Lighting

Preserve the beauty of the night skies by utilizing exterior lighting that accents and protects without eroding stargazing. Spotlights should be placed on timers or restricted to emergency situations only. Face accent lights towards the ground to decrease light pollution.

6. Protect the Natural Ecosystem in The Landscaping

Utilize native desert vegetation, boulders, and native rocks in your landscaping design. Native shrubs protect the soil surface from monsoon rains, promote water retention and infiltration and reduce erosion. The planting of mature trees will help to maintain the natural ecosystem functions, assisting in the establishment of seedlings, availability of nutrients and decomposition.

7. Choose a Driveway Location That Minimizes Grading

Driveway design should minimize mountainside scarring, and preserve the features of the landscape such as mature saguaros and boulder outcroppings. The slope of the driveway should be designed to meet local ordinances, using retainer walls and natural boulders to minimize the chance of erosion. Using pavers or exposed aggregate will reduce the disturbed area calculation for the driveway.

8. Strategically Place Windows Throughout Your Custom Home Design

Window placement is an important part of a mountainside home build. A properly designed home will utilize windows for natural light as well as beautiful scenery. During the architecture phase of your custom home remodel, make sure to notate the location of the trees, cacti or other interesting landscape elements. Windows are the perfect design accessories to bring the warmth of the mountain to the interior of the home.

9. Use Sustainable Building Designs in Your Construction

Solar power is recommended as a supplemental energy resource and for use in swimming pool systems. Rainwater harvesting systems can be integrated into the landscaping irrigation system, providing an environmentally friendly and sustainable water source for plants and trees.

10. Hire a Company Who Provides a Construction Warranty

Construction warranties provide more than just peace of mind. A warranty will protect you during your home remodeling or new home construction project, ensuring that your home is built to the specifications that were outlined in your contract. Choose a company that provides a minimum of a five-year warranty covering materials and labor.

How To Select The Best Home Furniture

If you have an interest in purchasing home furniture from Malaysia then there are certain considerations that should not be overlooked. As it is known as one of the top five exporters of furniture worldwide, you can be sure that the range of options will be extensive. It is important to think carefully about the purchase so as to ensure that you buy the perfect items for your place of residence.

Before spending any money you should visualize how the pieces you are considering would look in your own home. Whether or not you opt for a complete set of furniture or choose individual items would depend upon your exact needs. Often selecting separate pieces would give you greater scope for flexibility and changes at a later date.

If you feel that you do not have the time or the inclination to sit down and analyze every aspect of choosing modern Malaysian furniture, the solution would be to hire a professional to conduct the task on your behalf. Most interior designers would be able to suggest specific pieces depending upon your tastes, current decor, and budget. As such individuals are trained in decoration you would be able to create a look that is unique.

Today, choosing home furniture is a lot easier thanks to the internet. Now wherever you are located you can browse at leisure a wide variety of online furniture retailers. If you are planning to shop online make sure you are clear on such factors as the exact color of the items, their dimensions, and shipping costs. You should also inquire if there is a return policy in case you are not happy with the goods once they are delivered.

Of course you can always spend time visiting furniture stores in person. Though you would be able to see exactly how certain furnishings appear you would not necessarily have access to the greatest range of items or the best deals. Using the internet to locate suitable pieces and then planning a viewing trip would make more sense.

Before parting with your hard earned cash make sure you have considered how the home furniture will be transported to your home. Do you need to pick it up or will it be sent to your address. Also, do not make the unfortunate mistake of buying pieces that are too large to fit through your doors or windows; this is an error that occurs all to often.

Discount Home Furniture for An Entertainment Room

Having a room in the house dedicated to entertainment can be relaxing. Whether you’re turning an old bedroom into a game room or the basement into a den, you’ll want a space that has a great sound system, a lot of space for guests, and great discount home furniture that will accommodate everyone.

The first thing you need to do is figure out your entertainment set up. How big your television is going to be depends on the size of your room. Consider wall mounting for saving some space. A great surround sound system will help give that movie theater feel when watching films. You can mount speakers above you in the corners of the room or just placed them on the floor. Either way you’ll get a unique audio experience.

If you are a gamer, setting up your consoles in here will be another great entertainment option. Make sure to purchase a surge protector so you can plug everything in one place and protect them from any electrical blow outs.

Setting all your electronics up, plus storing DVDS, video games, and other nick-nacks can be tough. A large entertainment center is a great piece of discount home furniture that can be used to keep you organized. They often come with built in DVD shelving and extra space to store that Xbox 360 or Blu-ray player underneath the television.

After you have your sound systems and electronics set up, it’s time to think about seating. Couches are a great option, but sectionals are even better if you are planning on using the room often to host parties. Sectionals can accommodate more people but their layout can save some space. Don’t forget an ottoman, as it can be great as an extra seat if needed. You can often find ottomans that also double as storage which may be another way to keep those movies in order.

Another discount home furniture option is true game room pieces like a pool table or ping pong. No matter what game of choice, even if it’s an old school arcade cabinet, it’ll be appreciated by all. Everyone enjoys a good movie, but to have an option to play a game multiple people can really get involved in is great in itself. It’ll also let your game room have a bit of an old school feel. Don’t forget the much needed dart board.

Carving out a separate space for fun and games will you, family and friends a place to go a little crazy without disturbing anyone else in the house. Properly furnished, it could soon become your favorite room in the entire house.

Traditional Home Furniture

The different elements of traditional furniture

When you first hear references to the Captain’s bed you immediately think of sailors that have been through the rough seas. However there are practical uses for this piece of furniture in the home. In fact it can help the home owner to increase the enjoyment that they get from their living spaces. All this is achieved with the use of minimalist principles and materials that are actually sustainable. It is a pity that not many people are completely used to the idea that this piece of furniture can make great furnishings for the home.

    1. The Modern bed is great for storage purposes. You have an item of furniture that is used for a variety of functions including storage. If you have security needs you can even put a lock onto the furniture to ensure that it is not easily accessible. The people that run with such a course of action can look for other discreet ways of securing the storage space. The needs of the individual customers will vary and therefore the solutions to their problems cannot be generic. However we can conclude that this piece of furniture is very useful when it comes to protecting your property in storage. The delicate items will not be shifting from side to side and that is a definite advantage.
    1. Depending on the brand that you buy the Usable bed can be very comfortable. You can use the mattresses and other cushions to ensure that you have a very comfortable stay. This will be nothing like the conditions that you can expect in a cramped ship. Instead you will have great flexibility in terms of the way that you can arrange your home yet at the same time you will be living in relative comfort. It is the thing that is making this piece of furniture very popular with the public. Even children might be able to use if you take the necessary safety precautions. In using the item you are really just getting the benefits that the manufacturers planned all along.
    2. You can use sustainable materials for the Captain’s bed. This means that you do not have to restrict yourself to wood. It is possible to look at the other alternatives and see whether they can do the job effectively. At the same time you will be playing your role in securing the environment. This is the dual role that you can look to in order to ensure that you are getting the maximum benefits from the purchases that you make for your home in terms of furniture.
  1. Space is utilized responsibly when you buy the Captain’s bed. If you live in the modern homes where the space that is available to you is at a premium, this can be a great solution to your problems. You will be able to fit in well and yet you will have the extra room to store your property as well. This is a complete furniture piece.

How to Pick Out Home Furniture for a Busy Lifestyle

Leading a busy lifestyle means having less time to enjoy the comforts of home. But that doesn’t mean you should abandon comfort altogether. In fact, when you’ve got no other choice but to be busy, your home furniture should help you get the most of what little time you have to feel comfortable.

Furniture that will fit a busy lifestyle should have certain qualities above other considerations. First, it has to be low maintenance. The less you have to do to keep it spic and span, the more time you’ll have to simply lay back and relax. Next, it will need to be space-efficient. After all, when you’re trying to get from point A to point B on a tight schedule, being forced to go through a long path or to squeeze between sofas and tables will definitely make your temper rise.

Here are some suggestions to create a comfortable, low-maintenance home for a busy bee:

The More Functions, The Better. Aside from the novelty factor, multi-functional furniture can help you reduce clutter and make it easier to move around. Some ideas you can consider include using a storage chest or ottoman for your coffee table in the living room, or choosing a sectional that extends into a chaise-like section instead of buying a separate chaise lounge to pair with your sofa.

Plan The Room To Make The Most Of The Furniture. Speaking of multi-functional home furniture, instead of buying a single desk for a single function, try to envision a space-efficient room and select furniture to follow that idea. This is especially important if your home tends to double as your second office. By being wise with how you arrange the room and position everything you need for certain tasks, you can spend less time searching for documents or designs and finish work faster.

Whether To Go Leather. When it comes to upholstery for your home furniture, investing in leather will definitely matter in short run. Cloth-upholstered sofas get dirty and dusty easily and will have you taking the covers to the washers every so often. Leather upholstery will also help greatly if you keep a pet at home. Fur is much easier to deal with and leather is more resistant to stains. Split liquids will often just need a wipe-down to keep clean.

On the other hand, leather tends to fade over time, especially when humidity varies. If you use an air-conditioner, but leave it off when you’re not in, then leather may not be the best option to you. Leather also scratches relatively easier and these may be harder to repair.

While all of these ideas will help you pick out the best home furniture to suit your lifestyle, remember that above all, you must prioritize comfort. This is most important for the places you plan to spend the most time in, such as your home office and your bed.

CNC Cutting Machine Financing Has Never Been This Convenient

The CNC cutting machine is an immensely useful tool that is used in several industries which involve usage of heavy machines as well as require precision. Metal-works, shipping, electrical and test equipment industries are the ones which fall under this category.

Uses of a the machine: A good basic CNC cutting device does both plasma and oxy-fuel cutting. Refinements on a basic cutting machine might provide it with the ability to perform other functions like spotting holes in order to facilitate drilling, side or end cutting and routing wooden shapes. Further refinements, could enable it to do water jet-cutting too.

Skilled Operators are a Must: The operators of the present-day device should be as adept as traditional craftsmen. Since the machine is specialized and computerized, only skilled personnel can operate it. The operators of the CNC cutting devices include the men and women who design and make cabinets, woodwork, signs, and a whole range of metal, solid surface and plastic objects. The manufacturers who employ these operators know how important it is to have a good quality CNC cutting machine, since a skilled operator and a high-quality machine together would ensure excellent results.

Requirements of a Good CNC Machine: A good quality machine has a cutting table that covers the area bound by a length of four feet and a width of eight feet, which can handle satisfactorily a standard 4 x 8 plate of metal, wood, plastic, glass or stone.

A table which is not of the sufficient dimensions will hinder the work of the operator since he has to repeatedly reposition the plate. In their jargon, this repositioning is called indexing. Since the operator would spend a considerable amount of time indexing the plate, he would lose out on the time allotted for the actual cutting. This would have a direct impact on the output, which in turn, would translate into fewer products on the shelf.

Thus, a manufacturer has to be a smart buyer in order to avoid the vicious reaction between a bad purchase and poor sales volume. A wise manufacturer would recognize the fact that a good sales volume reflects the well-planned purchase of a CNC cutting machine. The manufacturer also has to look out for proper after-sales service facilities to ensure proper maintenance. Retrofitting the lost/damaged parts of the machine is hazardous for your machine as it reduces the performance of your machine. Not only is it time-consuming to operate the machine, but it also has direct detrimental impact on the quality of work. If your operator is constantly indexing then he has less time to produce goods, thereby decreasing your output. So ensuring the proper maintenance of your machine is instrumental to a great performance.

CNC Cutting Machine Financing: Due to their specialized features, these machines are high-priced. This becomes a major impediment to small-time buyers. However, this problem has a solution in the form of CNC cutting machine financing facilities.

These days, numerous financing companies provide debtor-friendly finance schemes for you to go ahead and buy the equipment you need for your business. These finance schemes ensure hassle-free procurement of such equipment, thereby ensuring the use of good quality products and higher sales volume. Since these machines are digitized now, they guarantee accurate and high-quality work. If you need a machine, you know you can get one right away, thanks to CNC cutting machine financing. So your dream CNC cutting machine is just a scheme away!

Home Improvement Tips – Ideas for Changing the Flooring

So you’re thinking about changing that ugly old carpet or vinyl floor with something fresh and beautiful and you want to use tile instead. You have looked at a lot of pictures in home design magazines; you have an idea of the cost, and the retailer with the best selection but know where to start.

Well it sound like you already have a great start, you found some design ideas from magazines, you know where to purchase the materials, and you have a rough idea of the cost, and you have decided to do this yourself, outstanding! The tips I’m about to give you come from my experience as a professional tile setter in Phoenix Arizona.

The first thing you want to think about is what kind of surface are you going to lay that beautiful tile on, wood or concrete. I have found that the preparation of the surface will determine how your tile will look after it’s installed and how long it will last in the home, and let’s face it you don’t want to redo this next year. Follow these basic steps first before you lay your first tile

Is the surface level

Look for flaws like dips and bumps make sure the surface is smooth

If working with a wood surface make sure it’s secure no nails sticking up and it’s tight to the substructure

When working with concrete look for cracks, you don’t want the surface to crack more after you install the tile

Make sure the surface is clean before installation

These starter tips will save you time and frustration and make the experience more enjoyable for you. Next you want to make sure you measure the area you’re going to lay. You don’t want a 6″ cut on one wall and a 3″ cut on the other that would look really bad especially in a entry way. The first thing you need to make sure of is the room you are working with square? Trust me when I say this you don’t know how many times I went into a new home and found that one end of the room measured 12′ and the other end was 12′ 2″ Because of poor framing. This is ok if you’re working with larger tile but can be a real problem if it’s smaller tile like in a bathroom. Here are some tips on laying your floor out before starting the installation.

Buy some tile spacers. They look like small rubber crosses, they will determine your grout line width and give you an idea of your wall cuts, and in most cases will measure ¼ in, between tiles.

Don’t be afraid to lay the tile out in both directions using the tile spacers to get an idea what it’s going to look like.

After determining if your room is square set an installation chalk line in both directions, this will help keep the installation straight.

There are different types of adhesives for laying your tile I use thin set mortar for concrete, and you can use what is called cement board, this can be laid over any wood surface and will eliminate the use of the mastic clue. The reason for this is when wood is affected by temperature it will expand and contract, and the mastic clue will allow it to change with this effect, this is not a concern with cement board, Mastic is pre mixed, and thin set mortar will need to be mixed before you can use it. When mixing your thin set mortar it’s like mixing concrete it comes in a bag and you need to add water, be careful not to get it to thin, it needs to be thick enough to use with a trowel. I used a wheel barrel to mix it in and then transferred it to a 5 gal bucket, this made it easier to handle. Also remember that when installing the tile to make sure not to leave any air bubbles trapped under the tile. This will cause the tile to brake. The method I use is to set the tile by pushing down evenly on the tile until I see the adhesive start to come out from the edges and then I lightly tap on the top of the tile a listen for any hollow sound, this will tell you if there is a pocket of air trapped and if you need to push a little more.

The Future Is Now – Green Construction

Energy costs are skyrocketing and climate change is a legitimate threat. With traditional energy resources depleting at an alarming rate, it is imperative that we begin utilizing green concepts into our construction technology and building maintenance. It should be our goal as a responsible society to become energy independent and self-sufficient as soon as possible.

Taking measures to increase energy efficiency should not be thought of as a future endeavor. The time to begin modernizing our office buildings and commercial facilities is now. Building designers and architects have come up with amazing ways to support green development and healthy lifestyles from within small towns to expansive cities. Builders and planners are now on board with constructing facilities that meet or exceed LEED (Leadership in Energy and Environmental Design) certification. With new green technology being developed every day, new energy efficient and LEED certified buildings are going up at a monumental rate.

Wind and solar power are just two ways that a new green building can be energy independent. Clean solar or wind energy can power entire city blocks, not just the building where the instruments are installed. It is easy to see how a large commercial building has an impact on the surrounding community. By installing solar panels or wind turbines, a modern skyscraper can be a positive force for change to the entire city. When one giant leads by example and demonstrates how beneficial – economically and environmentally – operating a green facility is, it won’t be long before the entire city follows suit.

Obviously, not all buildings are new construction, and no one will tear down a perfectly good building in order to build a more efficient one with new green technology. But there are some steps that can be taken that will make even the oldest commercial building operate more energy efficiently.

Taking measures to decrease water waste is just one way a building can save money and have a positive impact on the environment. Installing tank-less hot water heaters and water-regulating faucets and toilets will have a significant impact on the overall amount of money saved in utility bills. Other steps a building maintenance department can take are making sure the HVAC system is operating correctly and replacing all incandescent light bulbs with energy efficient fluorescent ones. Cleaning and maintaining a building’s HVAC system will keep it operating at optimum efficiency, ensuring clean airflow and ventilation, while swapping out traditional light bulbs for fluorescent ones will drastically reduce electric bills and electricity consumption.

By incorporating green standards and green construction techniques into our commercial buildings, we will all enjoy the benefits of lower utility bills and clean, renewable energy. By reducing carbon emissions and water waste, we are creating an environment that the entire global community can enjoy for many years to come.

Industrial Vs Non Industrial Plasma Cutting Machines

Industrial vs Non-industrial Plasma machines

Plasma cutting technology is a widely used process that has gained widespread popularity for its ability to cut most forms of metal and is quite favored for its simplicity in use. It’s versatility with its range of capabilities and applications have made it a universally accepted metal cutting process.

Non-industrial Plasma

Non industrial plasmas are best suited for garage users of steel fabrication who require plasma cutting perhaps 2-3 hours per day 3-4 days per week. A plasma in this class is best suited to small operations that work on mostly customised jobs. Non industrial plasma units are much cheaper to purchase than industrial plasmas but cannot tolerate the ongoing high volume that an industrial Plasma is designed for. Air plasmas and lower end conventional mechanised plasmas generally fall into the category of non-industrial plasmas.

Industrial Plasma

Industrial plasmas refer to plasma units geared towards high volume large production facilities that have enough work to elicit a machine to operate a full eight hour shift five days per week. Plasmas in this class usually can operate up to three eight hour shifts per day, seven days per week if necessary. If your operation fits into this category then an industrial plasma is not only preferable, but an absolute necessity.

Higher end Conventional plasma and High Definition Plasmas fall into the category of industrial plasmas. With modern day advances however High definition is generally the plasma of choice due to the higher levels of automation they provide as well as the higher level of cutting proficiency they are capable of achieving.

Advantages of Industrial Plasma (high definition plasma)

• Lower operating Costs

• Oxygen and multi-gas capability for improved

• Faster Cut speeds

• Improved weldability

• Significantly longer consumable life

• Thicker cutting capability

• Quick disconnect torch

• 100% duty cycle

• Hi-Definition technology

• Best cut quality including squarer edges and rounder holes

• Mark, cut and bevel with the same consumables

• More process options for optimizing cut quality

• Remote (CNC) gas switching capability

• Patent TruHole technology for best plasma cut holes – unique to Hypertherm high definition plasmas

• Hdi thin stainless technology

• Optimal gas mixing for mid-range stainless steel

• Higher pierce capability

• Much higher automation

• Higher resale value

• Much longer life on machine

• Significantly higher production capability

• Significantly higher computer aided design capability

Essential components of an Industrial plasma cutting machine

What is most essential to a plasma machines ability to provide continuous quality cutting are the ‘Controllers’ of a plasma unit. A well-engineered, well-constructed control unit is essential to providing consistent high level cutting precision and quality, carried out at high speeds over long hours. A poor to average control unit is incapable of achieving consistent precision especially over long production intervals where it is likely to overheat or break down.

Controllers consist of five main components: Power source, controller, a lifter, drives and servo motors.

Power Source

It is very important to get a renown plasma source for your machine to achieve a high performance and reliability to deliver consistent cut quality, high productivity, lowest operating costs whilst lasting you a long time for your business.

Lifter

The lifter is an essential component providing precise height control of the plasma torch. Utilizing a quality THC height sensor will reduce the cut to cut cycle time (up to 60%), provides better cut quality due to proper assembly of torch height, savings on power and longer consumable life.

In addition the quality torch height controllers automatically adjusts voltage for proper torch height to optimize cut quality and consumable life. Traditional torch height controls require an operator to periodically adjust arc voltage to ensure proper cut height.

Control

The controller needs to have all the process expertise built in resulting in flexibility and ease of use for the end user. A quality controller has a digital I/O sercos system that will deliver reliable motion system quality and will improve the cut quality and productivity.

The software should allow flexibility and ease of use for the end user, so a person with little or no experience on the controller can cut like a seasoned professional in as little as a day.

High End Servo Drives and motors

High end drives like Bosch help ensure high stiffness essential for accuracy, minimal backlash and easy adjustment. The servo drives receive command signals that amplify and transmit electric current to the servo motor in order to produce motion proportional to command signals.

Their main advantage over DC and AC motors used in non-industrial plasmas is the addition of motor feedback which can be used to detect unwanted motion or to ensure the accuracy of a command motion. Servos in constant speed changing use typically have a better lifecycle than DC/AC motors and can also act as a brake by shutting off generated electricity from the motor itself.

Bosch Servo motors

Bosch servo motors allow for precise control of angular position, velocity and acceleration. It consists of a sophisticated motor coupled to a sensor for position feedback.

Stepper motors typically used in low end CNC machines provide no feedback encoder as drive signal specifies the number of steps of movement to rotate. This lack of feedback limits performance as the stepper motor can only drive a load that is well within its capacity otherwise missed steps under load may lead to positioning errors.

Low rails

Industrial plasma’s usually feature low rails secured to the ground to ensure the highest level of stability driven by helical drives to provide optimal accuracy during the rapid fast moving of the plasma beam during long production intervals.

Table design rails usually seen on non-industrial plasmas won’t have the same level of rigidity and are thus less suited to high volume rapid pace production. In addition with rails built onto the cutting table and so close to the plasma, with constant long duration cutting the rails are at risk of distorting in shape (over time) due to the constant exposure to heat.

CAD / CAM software

To greatly improve the efficiency of production in a high volume settings you require a more advanced software to provide a much wider range of functions which greatly enhance the productivity of that operation. Using a more advanced software unit can provide some of the following advantages just a to name a few:

• Import CAD and CNC files

• Separate multiple parts from a single CNC file

• Group Parts into clusters for nesting

• Automatic and manual nest sequencing

• Control cut directions and cut sequencing on part by part basis

The addition of a quality software allows a much higher level of automation, significantly reducing key punching and is user friendly enough to allow even the most novice operator to cut parts like a seasoned professional.

Cutting table

For the purposes of industrial fabrication it is essential that a cutting table is well constructed, heavy and durable to meet the demands of an industrial operation. In most non-industrial plasma units, cutting tables are constructed from thin sheet metal and alluminium castings to reduce the cost of the overall unit. The problem with this is that due to the thin, light construction, the table can shake or wobble, adversely affecting the accuracy of a cut part. Furthermore over long production periods, due to the ongoing exposure of heat generated from the plasma these tables are likely to distort over time.

The durable robust construction of an industrial plasma table is essential to give the table stability for the highest level of accuracy and to prevent heat distortion.

Industrial plasma units usually offer the choice of a water or dry table with a dust collection unit. Water tables are cheaper to purchase but require much more ongoing maintenance and cleaning which over time becomes more expensive than using a dry table with a fume extraction unit. In an industrial environment both are acceptable.

Non-industrial plasmas usually come with water tables once again to reduce overall the cost of the unit though some are offered with a dry table and fan which is only sufficient in removal of dust and fumes in a light fabrication setting.

Having a Support team

The purchase of a Plasma machine whilst being an expensive investment can provide enormous returns to any business where there is a demand for work, the correct facilities are utilized and they are maintained with the right level of care.

It is essential therefore that a full support team is available to service your machine for ongoing maintenance, in the incident of a breakdown or where any other form of technical support is required.

In any high volume industrial environment any down time can translate into large losses in profit so it is important to have a local service team, but more to the point a team who knows the full operation of the machine from bolt to bolt, to shorten the time required to fix the machine, though also to provide phone support for quick fixes that do not cost any call out fees.

Why Non-Industrial Plasmas are so much cheaper to purchase than Industrial Plasmas

Many first time buyers of Plasma machines may look into purchasing a non-industrial plasma as a form of entry level use not fully understanding the full capabilities or limitations they have especially when compared to industrial level plasmas.

A cheaper price tag is often the motivator to go with a non-industrial plasma but in the long run once users have been able to thoroughly compare the two in performance, reliability and productivity it becomes very clear why non-industrial plasmas are so much cheaper.

In most situations fabricators who start out using non-industrial plasmas find with ongoing use that their functional capacity is very limited and with further research and exposure to industrial plasmas that they eventually upgrade to one as they provide much greater productivity, more flexibility in use and better quality cut parts with consistent precision. In addition industrial plasmas have a much greater lifespan, are a lot more durable and are built to handle a much higher degree of volume equating to far better value.

Many manufacturers of non-industrial plasma machines try to capitalize on the lower end cheap market by providing only the bare essentials of plasma cutting. Many of the reasons they can offer a plasma machine at a cheaper price is due to reasons including:

– Often software is not included in the package and in many cases users need to integrate a separate laptop/PC to operate the CNC cutting function. Even when software is provided usually they only provide very basic functions.

-Table and beam are constructed of thin light constructed sheet metal, not suited to heavy duty fabrication and are highly likely to distort in shape over time, due to ongoing heat exposure generated from the plasma. Rails are also built onto the table rather than being bolted into the ground.

This type of design does not provide the stability required to support quality precision during fast rapid movement due to the lack of rigidity and lightness of the table construction.

-Use of DC/AC motors and stepper motors as alternatives to drives and servo motors translate to limited performance, slower cutting, inconsistent poorer precision and positioning, slower acceleration and velocity.

-Fume extraction units are not included and another way to reduce the price on non-industrial units. A water table or dry table with fan are usually what are provided, though with light fabrication this is usually sufficient.

-Cheaper components are normally incorporated that don’t have any real brand reputation for performance or reliability.

-Aside from the above non-industrial plasmas can generally operate perhaps 2-3 hours per day 4-5 days per week and have an average lifespan of about 3-5 years.

Conclusion

For those considering the purchase of a plasma unit it is very important to be clear on the capability of the unit and whether or not that unit can meet all their requirements not just that of a single part.

Plasma machines have been designed to provide varying levels of functionality with a price range to match. Industrial plasma machines are logically more expensive but when the components are thoroughly broken down, one can clearly see that the cost is commensurate with the performance and capability, and in retrospect this is also true of non-industrial plasma machines. When matched in the suitable environment, business owners often see a return on investment within 2-3 years and as smaller businesses grow, industrial plasmas become a very natural progression.

Experimental Home Furniture

Experimenting with home furniture

It is a courageous person that plays with the effective but somehow dubious furniture accessories such as the plastic lawn ornaments. The first advantage of these things is that they are very practical especially if you have young children to look after. It is expected that these kids will be boisterous and will play with the accessories on a regular basis. The risk of damage is very high and you have to ensure that you are prepared to go for that risk. In doing the work that is expected with the different furniture items that are meant to make the home stylish as well as comfortable for the residents, you will be getting something that can deal with the characters of your young children.

The cleaning process is fairly simple for the different products that you buy for your home in an effort to put it on top of the fashion stakes. You just need cloth and a bit of water. The rest is relatively simple and you can enjoy a relaxed atmosphere for a significant period of time. The downside to this sort of thing is the fact that you are expected to really work at getting the process to work for you. In due course you will find that the furniture is ultimately advantageous. The use of the latest furniture items that bring class or elegance to your domestic dwellings is to be admired. Some people are worried about the stylistic statement that such accessories make on the owner. To me that is just superficiality on a grand scale.

You have to know the practical benefits of the essential items of furniture that have to be selected from the most stylish shops in town or within the market. As a head of a family of children it is not within your range to get something that is delicate and classic. The children will run it down within a matter of minutes. You are really looking for furniture that is practical. It has to do the basic functions and yet not be too ugly for polite society. This balance is well achieved by the modern furniture items that try to combine efficiency and elegance with a touch of old world values into the home. On the one hand they are decorative in their appearance but on the other hand it is relatively easy to look after them.

The home will be better off with the dramatic furniture sets that inspire confidence in the client when they place them within the home setting. They might not be the branded products that the affluent neighbors have but they will do the job very well. In fact you might find that they are the right solution for the clients. You will need to chase up the benefits of the standard and exotic furniture items that bring a classical dimension to the general home setting. This means that you look after the furniture and do not do anything that is likely to damage the credibility of the home as a whole. I would not expect to find them in a historical palace. These are items for the mass market and they should remain that way for the foreseeable future.